The Cold Plunge Bath by Kooru is a unique kind of Ice Tub. Each and every one of these Cold Plunges is handcrafted using Sustainable And Ethically Sourced Materials!

These cold plunges are made of redwood and arrive fully assembled and ready for the plunge. All you need to do is connect it to v110 electricity.

The tank size is a perfect fit for most shapes and sizes. that is up to about 6’5″

Specifications:

Cold Plunge Standard Tub size is 64” L x 34 “ W x 35” H / 5.3’ L x 2.8’ W x 2.9’ H
The XL size is 76" L x 34" W x 35" H. So a foot longer than the Standard Tub.
(Due to the hand-crafted nature of our tubs, dimensions may have very subtle variances in length and width dimensions up to ¼”.)
At least 33 inches of clearance through doors and/or passages is needed to get your tub to its location.
The size of the tub compartment is 36L * 24W *30H. (The Tub is high-density polyurethane)
Standard Cold Plunge Tub dry weight: 400 lbs (can be moved and lifted by grabbing the corner posts by two people or moving trolleys), wet weight ~1000 lbs. XL Cold Plunge Tub dry weight is 475 and wet weight is 1225.
Takes approximately 60 gallons of water in the tub. Water height is adjustable based on the body’s displacement and how high you want it to reach. Some people like it just above the shoulders however you can easily reach neck/ chin height
Made of redwood
Treated with Shou Sugi Ban - An ancient Japanese wood preservation technique
Five color options
The water in Kooru Cold Plunge Tub can reach temperatures as low as 39º F. Realistically it sits around 2 degrees within the range you program it to. You can set the temperature to your required temperature below 80º F. Please note it does not heat the water only keeps it below a set point.
Chiller is 1/4 hp pump is 950 GPH
Water sanitation or treatment is by an Ozonator emitting O3
Typical Power usage is 350 – 500 Watts @ 3-5 amps on a regular 110-volt plug. Electrical outlets should be GFCI or grounded outlets as required by state laws. Plugs into a normal home outlet.
Filter changing and replacement is about 1 every 1-2 months depending on usage.
Manufacture warranty on parts (chiller 1 year and pump 3 years) and 3 years on workmanship
Made in USA

Color Options:

Teak - Redish Brown
Spanish Oak - Dark Brown/Black
Oiled Leather - Grey/Blue
Two Variations of Natural (light and dark)
All Cedar (Call us for a quote)

Orientation:

The grate needs 16 inches of clearance to access the equipment/filter
The control panel needs to be on the correct side if going into a corner
Electrical will be on the opposite sides of the control panel - 110v plug - 5amp

Production time is about 2 weeks, shipping is based on location but another 2 weeks or so.

Arrives on a pallet in the driveway

Free Shipping to continental USA!

Kooru Cold Plunge Tub uses a multi-faceted approach to water treatment Ozone, or O3 is the first line of water chemical treatment, combined with a 10″ Filter System to remove other impurities from the water. The Tank stays clean and with proper care and maintenance shouldn’t require a water change, to help conserve water. Some other unfiltered/ treated cold plunges require chemicals and or continuous water changes.

Ozone technology is very common in spas and other at-home water systems. It is a powerful and safe disinfecting agent. It removes the need to use things like chlorine and bromine and is safer because it consists only of pure oxygen. In short, ozone is terrific for cleaning water, which is why it is used in the most advanced drinking water treatment plants in the world.

Specifications:

Color Options:

Orientation:

Shipping/Delivery/Warranty Policy