DTF Station Miro 13 DTF Powder Shaker and Dryer - DTFS-MIRO13
The Miro 13 is DTF Station's powdering and drying solution for every A3 and A4 sized DTF workflow.
Due to more optimized and even heating, power consumption has dropped to 1100W, making for a more cost-efficient and accessible powdering solution. Plus, the built-in air purifier on the Miro 13 ensures a safer, more eco-friendly working environment that saves space taken by an external air purifier.
Features
-
Built-in air purifier & smoke recycling system: save space and your workspace
- Replace Filter every 1-3 months depending on usage.
-
Lower heating system: more even heating and curing
-
Easy to operate: powder shaking, curing, and air purifying in one machine
-
Low power consumption: 1100W
-
Simple setup: turn the power on and start
-
Full tech support: tech videos, direct support messaging through Slack, and more!
Specifications
| Max Film Width |
13" (33 cm) |
| Control Panel |
Switch on/off |
| Power Consumption |
1.17 kW, 10.6 A (110 V) |
| Voltage |
110 VAC (±10%), 50/60 Hz |
| Product Weight |
77.16 lb (35 kg) |
| Packaging Weight |
110.23 lb (50 kg) |
| Product Dimensions (D × W × H) |
40.03" × 22.44" × 19.92"
(1017 × 570 × 506 mm) |
| Packaging Dimensions (D × W × H) |
28.34" × 24.40" × 19.29"
(720 × 620 × 490 mm) |
| Power |
110 V / 2.5 kW / 15.9 A |
| Daily Maintenance |
Reload powder every hour (when paired with Prestige L2/XL2); simple end-of-day cleaning |
| Documentation |
Seismo M16 User Manual |
Manual
What our Experts Think
-
All‑in‑One Efficiency: Automates powder application, curing, and air purification in one compact unit — saving manual labor and reducing workflow steps for A3/A4 DTF printing.
-
Built‑In Air Purifier: Integrated air filtration and smoke recycling improves shop air quality and removes need for a separate purifier — ideal for tighter workspaces.
-
Even Curing for Consistent Results: Bottom platen heating and a molded curved platen help ensure uniform powder melt and strong transfer adhesion every time.
-
Low Power & Simple Setup: Designed for easy installation with ~1100 W power consumption and a straightforward control panel — plug‑in and start for faster setup.
-
Compact Yet Capable: Sized for A3/A4 workflows (≈13″ film width), making it a smart finishing partner for smaller format DTF printers without taking up excess space.
Q&A
Q: What is the DTF Station Miro 13 Powder Shaker and Dryer?
A: The Miro 13 is a compact DTF powder shaker and dryer designed for small-format transfers, automating adhesive powder application and curing.
Q: What is the Miro 13 used for?
A: It evenly applies and cures DTF adhesive powder, ensuring durable prints and reducing manual effort.
Q: What print sizes does it support?
A: It supports DTF films up to 13 inches wide, ideal for small to medium transfers.
Q: Who is the Miro 13 best for?
A: Perfect for small print shops, hobbyists, or startups seeking consistent, professional-quality results.
Q: Does the Miro 13 improve print consistency?
A: Yes. Automated shaking and controlled drying ensure even powder coverage and reliable curing.
Q: Is it compatible with most 13" DTF printers?
A: Yes. The Miro 13 works with most standard 13" DTF printers and films.
Maintenance Tips
-
Clean powder trays, filters, and interior surfaces daily to prevent buildup.
-
Check shaker mechanism and powder circulation to ensure even coating.
-
Wipe conveyor belt and drying area regularly to avoid residue transfer.
-
Monitor temperature and airflow settings for consistent curing.
-
Inspect heaters, fans, and sensors weekly for optimal performance.
-
Use only recommended DTF powders to reduce clogs and extend machine life.
-
Power down and clean after long production runs to maintain efficiency.
Damage 
Loss 
Theft 
