Modine Commercial Workspace Heater - 150K BTU/Direct Spark Ignition/NG/Separated Combustion/Single Stage w/Aluminized Steel Heat Exchanger - PTS150AS0111
Features
- Specifically designed for environments with hostile atmospheric conditions, such as chemicals, high humidity or negative pressure
- Combustion air is brought in from outside the heated area - either from outdoor air or from an adjacent room - eliminating the need to use contaminated indoor air for combustion
- In-shot burners fire each heat exchanger tube for reliable performance, ease of service and decreased noise on ignition
- Same-size vent and combustion air inlets throughout product line makes installation easier
- Longer allowable vent lengths (up to 50′ vs 30′) versus previous line, providing greater installation options
- Round vent pipe and combustion air inlet pipe connection
- Automatic reset vent pressure switch is designed to prevent operation of the main burner in the event there is restricted venting of the flue
- Integrated direct spark control board provides digital control of the air mover, inducer, ignition, gas valve and flame sense
- Control Step Down Transformer used to step down from 115v to 24v for the gas controls, fan delay relay, field supplied motor start and more
- Remote flame sensor verifies ignition of all burners, monitors the flame single and communicates with the integrated circuit board
- High limit control switch is mounted in the air stream and will shut off the gas supply in the event of overheating
- 4" vent & combustion air connection
- Natural Gas
- \n
- 150,000 BTU
- \n
- Direct spark ignition
- \n
- Single stage - on/off operation
- \n
- Aluminized
- \n
\n
What our Experts Think
-
Robust Commercial Heating: 150,000 BTU output delivers strong, reliable warmth for warehouses, workshops, garages, and light industrial spaces.
-
Separated Combustion: Draws fresh outdoor air for combustion, improving indoor air quality and combustion efficiency.
-
Natural Gas Advantage: NG fuel source offers consistent performance and cost-effective operation without propane handling.
-
Dependable Ignition: Direct spark ignition ensures reliable starts and steady heat delivery.
-
Durable Heat Exchanger: Aluminized steel construction resists corrosion and supports long service life in demanding environments.
-
Simple Operation: Single-stage design makes installation, control, and maintenance straightforward.
-
High Market Appeal: Strong demand for efficient, high-output commercial heaters that combine performance, longevity, and energy savings.
Q&A
Q: What type of heater is the Modine PTS150AS0111?
A: A commercial natural gas workspace unit heater designed for efficient, reliable heating in large indoor areas.
Q: What is its heating capacity?
A: Delivers 150,000 BTU, ideal for warehouses, workshops, garages, and commercial spaces.
Q: What fuel and ignition system does it use?
A: Uses natural gas (NG) with direct spark ignition for dependable operation.
Q: What does separated combustion mean?
A: It draws combustion air from outside, improving indoor air quality and safety.
Q: Is it single stage?
A: Yes — single stage for consistent heat output.
Q: What heat exchanger material is used?
A: Features a durable aluminized steel heat exchanger for long life and corrosion resistance.
Q: Where is this heater best applied?
A: Best for commercial garages, warehouse spaces, workshops, and industrial environments needing efficient heat.
Q: Does it require electricity?
A: Yes — standard electrical power is used for ignition and controls.
Maintenance Tips
-
Clean Exterior: Regularly wipe down the heater’s exterior to remove dust and debris that can reduce airflow.
-
Inspect Heat Exchanger: Periodically check the aluminized steel heat exchanger for buildup, corrosion, or damage to maintain efficient heat transfer.
-
Burner Maintenance: Check and clean the burner assembly as needed to support proper combustion.
-
Test Ignition System: Confirm the direct spark ignition lights reliably and operates consistently.
-
Natural Gas Line Check: Inspect gas connections, fittings, and valves for tightness and leaks; correct issues promptly.
-
Clear Combustion Air & Venting: Ensure intake and exhaust areas are free of obstructions for safe, efficient operation.
-
Annual Professional Service: Have a qualified technician perform yearly maintenance including safety and performance checks.
Damage 
Loss 
Theft 
