Modine Commercial Workspace Heater - 250K BTU/Intermittent Pilot Ignition/NG/Single Stage w/Aluminized Steel Heat Exchanger & Burner - PDP250AE0130
Features
- Made in the USA
- 83% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster
- A power exhaust can rotate 180° allowing the unit to be vented vertically or horizontally
- A 100% shut-off if the unit does not light, to ensure that unburned gases do not build up in the unit
- An intermittent pilot-ignition system with continuous retry to keep the unit from locking and needing to be reset if the unit does not light on the first try
- All PDP/BDP units can be field-converted from natural gas to propane if desired
- A safety pressure-switch monitors the vent pipe to assure flue gases leave the building and do not back up in the space
- Designed to utilize the smallest-diameter vent pipe possible
- “Wing” screws so that the bottom pan can be dropped without a screwdriver or nut driver
- A level hanging mechanism for easy field adjustments after adding accessories that may change the unit’s center of gravity
- Draws combustion air from inside the workspace
- 6" vent connection
- Natural Gas
- 250,000 BTU
- Intermittent Pilot Ignition
- Single stage - on/off operation
- Aluminized steel heat exchanger & burner
Specifications
| Fuel Type |
Natural Gas |
| Control Type |
Electronic / IPI |
| Color / Finish |
Gray |
| Overall Size |
25.63" W × 40.25" H × 34.88" D |
What our Experts Think
-
Powerful Commercial Heating: 250,000 BTU output provides robust warmth for large warehouses, workspaces, and industrial facilities.
-
Reliable Ignition System: Intermittent pilot ignition ensures dependable starts while reducing gas usage compared to standing pilot systems.
-
Natural Gas Efficiency: NG fuel offers consistent performance and cost‑effective operation for high‑demand environments.
-
Durable Heat Exchanger & Burner: Aluminized steel construction resists corrosion and extends service life under heavy use.
-
Straightforward Operation: Single‑stage design keeps installation and maintenance simple for facility managers and contractors.
-
Versatile Application: Well‑suited for large open areas that need consistent, high‑capacity heat.
-
High Market Appeal: Meets strong demand for industrial‑grade heaters that balance performance, durability, and value in commercial settings.
Q&A
Q: What type of heater is the Modine PDP250AE0130?
A: A commercial natural gas workspace unit heater designed for large industrial and commercial indoor spaces.
Q: What is its heating capacity?
A: Delivers 250,000 BTU, ideal for warehouses, workshops, garages, and factory areas.
Q: What fuel and ignition system does it use?
A: Runs on natural gas (NG) with intermittent pilot ignition for reliable starts and energy savings.
Q: Is it single stage?
A: Yes — single stage for consistent, straightforward heating output.
Q: What heat exchanger materials are used?
A: Features a robust aluminized steel heat exchanger and burner for durability and corrosion resistance.
Q: Where is this heater best used?
A: Best for large commercial spaces such as warehouses, industrial workshops, loading docks, and large garages.
Q: Does it require electricity?
A: Yes — uses standard electrical power for ignition and controls.
Q: Is installation and maintenance simple?
A: Yes — designed with service‑friendly access and standard mounting for easier setup and servicing.
Maintenance Tips
-
Clean Exterior Regularly: Wipe the heater’s exterior to remove dust and debris that can impede airflow.
-
Inspect Heat Exchanger: Periodically check the aluminized steel heat exchanger for buildup, corrosion, or damage to maintain efficient heat transfer.
-
Burner & Pilot Care: Inspect and clean the burner and pilot assembly to ensure proper flame ignition and combustion.
-
Check Ignition Components: Verify intermittent pilot ignition components are operating reliably and replace worn parts as needed.
-
Natural Gas Line Inspection: Check gas connections, fittings, and valves for tightness and leaks; address issues promptly.
-
Keep Venting Clear: Ensure intake and exhaust areas are free from obstructions to maintain safe combustion and airflow.
-
Annual Professional Service: Have a qualified technician perform yearly maintenance including safety checks and performance inspection.
Damage 
Loss 
Theft 
