RIKON Filter Canister/Cartridge For 1 HP Dust Collector - 60-900
Filter Canister/Cartridge For 1 HP Dust Collector.
What our Experts Think
-
Essential upgrade for clean air performance: The RIKON Filter Canister/Cartridge For 1 HP Dust Collector - 60‑900 replaces the standard dust bag with a pleated cartridge filter that dramatically increases filtering surface area, improving fine dust capture and airflow efficiency in 1 HP dust collectors.
-
Enhanced filtration vs bags: Pleated design offers 4× more surface area than bags, helping trap finer particles (down to ~1 micron) and reducing dust re‑entrainment into your shop air.
-
Easy maintenance & cleaning: Built‑in internal rotating paddle/cleaner lets you dislodge trapped dust from the pleats without removing the filter, extending performance and reducing downtime.
-
Simple, secure installation: Attaches reliably to the dust collector body with a rubber gasket and band clamp, making setup and seal quality straightforward.
-
Broad tool compatibility: Designed to fit dust collector drums up to 14‑1/2″ in diameter, making it suitable for most 1 HP RIKON collectors or similar units.
Q&A
Q: What is the RIKON 60‑900 filter cartridge designed for?
A: It’s a replacement filter canister/cartridge made specifically for 1 HP RIKON dust collectors (e.g., model 60‑100), upgrading filtration performance over standard bags.
Q: How does this canister filter improve dust collection?
A: The pleated interior filter offers over 4× the surface area compared to basic bags, helping filter dust down to 1 micron for cleaner shop air.
Q: Does it fit standard 1 HP dust collector drums?
A: Yes — it’s designed to fit dust collector drums up to about 14‑1/2″ in diameter, easily replacing or upgrading your existing filter.
Q: What features help maintain airflow and performance?
A: This cartridge includes an internal rotating paddle that lets you shake/clean the pleats easily, helping maintain strong suction and prolong filter life.
Q: How is the filter mounted to the collector?
A: It attaches securely with the included rubber gasket and band clamp, ensuring a tight seal and effective dust capture.
Q: Is this filter a HEPA unit?
A: No — it’s not HEPA rated, but its 1‑micron pleated media provides significantly finer filtration than standard cloth or paper bags.
Q: Who would benefit from this filter upgrade?
A: Ideal for woodworkers and hobbyists using a 1 HP RIKON dust collector who want better fine‑dust control, improved airflow, and easier cleaning than standard filters.
Maintenance Tips
-
Disconnect Power Before Handling: Always turn off and unplug the dust collector before removing or cleaning the filter.
-
Clean Filter Regularly: Tap or gently brush the filter to remove dust buildup; for deeper cleaning, use compressed air from the inside out.
-
Inspect for Damage: Check for tears, holes, or compressed pleats; replace the filter immediately if damaged to maintain suction efficiency.
-
Avoid Moisture Exposure: Keep the filter dry; moisture can clog fibers and reduce airflow.
-
Check Seals & Gaskets: Ensure the filter seats properly and seals are intact to prevent dust leakage.
-
Replace Periodically: Even with regular cleaning, replace the filter according to usage or if airflow noticeably decreases.
Damage 
Loss 
Theft 
