GOODMAN 3 Ton 13.4 SEER2 96% AFUE 80,000 BTU Gas Furnace and R32 Air Conditioner System - Upflow - AQ-GR9S960803BN
The ACiQ AQ-GLXS3BN3610 is a cooling-only condenser unit. Providing a 13.4 SEER2 efficiency with a single stage, reciprocating compressor, the AQ-GLXS3BN3610 is an inexpensive condenser to cool your home when paired with an AC coil.The ACiQ AQ-GLXS3BN3610 is a cooling-only condenser unit. Providing a 13.4 SEER2 efficiency with a single stage, reciprocating compressor, the AQ-GLXS3BN3610 is an inexpensive condenser to cool your home when paired with an AC coil.
Features
- Ideal size to cover a medium-sized house
- 3 ton, 13.4 SEER2 AC-only condenser
- R32: Complies with Clean Air Act New Refrigerant Requirements
- Low sound output
- Fully charged for up to 15' of line set
- Factory-installed filter drier
What our Experts Think
-
High-Capacity High-Efficiency System: Combines a 3-ton R32 air conditioner with a 96% AFUE, 80,000 BTU gas furnace, delivering strong whole-home comfort with a focus on energy savings.
-
Premium Heating Efficiency: The 96% AFUE furnace significantly reduces fuel waste, making it ideal for lowering winter heating costs in colder regions.
-
Reliable Cooling Performance: The 13.4 SEER2 rating provides steady, cost-effective cooling for larger residential spaces.
-
Powerful Heating Output: The 80,000 BTU furnace ensures consistent warmth for larger homes or areas with higher heat demand.
-
Modern R32 Refrigerant System: Uses R32 refrigerant, supporting improved efficiency potential and reduced environmental impact compared to older refrigerants.
-
Upflow Installation Design: Built for vertical (upflow) setups, suitable for basements, utility rooms, closets, and standard HVAC configurations.
-
Balanced Efficiency + Power: A strong combination of high-efficiency heating and dependable cooling capacity, making it a well-rounded premium residential system.
Q&A
Q: What size home is this Goodman 3 Ton HVAC system designed for?
A: A 3-ton system is typically suited for medium-sized homes, depending on insulation, climate, ceiling height, and layout. A proper Manual J load calculation is recommended for correct sizing.
Q: What efficiency ratings does this system offer?
A: This system pairs a 13.4 SEER2 R-32 air conditioner with a high-efficiency 96% AFUE gas furnace for strong cooling performance and efficient heating.
Q: What is the furnace heating capacity?
A: The furnace is rated at 80,000 BTU input, delivering about 76,800 BTU of usable heat at 96% efficiency.
Q: Does this system use R-32 refrigerant?
A: Yes. The outdoor condenser uses R-32 refrigerant, a modern low-GWP refrigerant designed to meet current environmental standards.
Q: Is this furnace compatible with upflow installation?
A: Yes. The GR9S960803BN furnace supports upflow and horizontal installation, making it flexible for basements, closets, and utility spaces.
Q: What type of blower motor does it include?
A: It includes a 9-speed ECM blower motor that improves airflow control, efficiency, and quiet operation compared to traditional single-speed motors.
Q: Can this furnace be converted to propane (LP)?
A: Yes. It is factory-set for natural gas but can be converted to propane using an optional LP conversion kit.
Maintenance Tips
- Replace or clean air filter every 1–3 months to maintain strong airflow, efficiency, and indoor air quality.
- Keep outdoor condenser unit clear of debris and ensure at least 2 feet of clearance for proper airflow.
- Schedule professional HVAC maintenance twice yearly—before cooling and heating seasons.
- Inspect and clean supply and return vents regularly to ensure balanced airflow and comfort.
- Check condensate drain line periodically to prevent clogs, leaks, and water damage.
- Verify thermostat operation and settings to ensure accurate temperature control and energy savings.
- Monitor for unusual noises, odors, or performance changes and address issues early.
- Have a licensed technician inspect burners, heat exchanger, venting, and safety controls annually.
- Ensure refrigerant charge and electrical components are checked for optimal cooling performance.
- Maintain proper home insulation and seal air leaks to reduce system workload and improve efficiency.
Damage 
Loss 
Theft 
