Go Power Inverter; Inverts 10.7 Volt DC To 115 Volt AC - G7579948
Experience uninterrupted power with the 79948 Go Power Power Inverter. This state-of-the-art inverter is designed to convert 10.7 Volt DC to 115 Volt AC, making it the ultimate choice for powering a wide array of electronic devices.
Features
-
Pure Sine Wave Technology: Provides an exact replica of AC power for optimal performance and reliability.
-
Dual GFCI Outlets: Enjoy safe and convenient access to power with two built-in outlets, ensuring a reliable connection for your devices.
-
Wide Voltage Range: Effectively runs any load within its wattage range without interference.
-
Durable and Low Profile Design: Compact and robust, designed for easy installation in any setting.
-
Power Save Mode: Reduces energy consumption, enhancing efficiency and saving you money.
-
Full Overload Protection: Safeguards your devices and the inverter itself from potential damage.
-
Remote On/Off Capability: Offers added convenience with the ability to control power from a distance.
-
Thermal Protection: Ensures safe operation under varying temperature conditions.
Specifications
| Continuous Output Power |
1000 Watts |
Maximum safe continuous load supported |
| Peak Output Power |
2000 Watts |
Short-term surge capacity for starting heavy loads |
| Efficiency |
85% – 92% |
Conversion efficiency range (power loss varies with load) |
| Number of Outlets |
2 |
Total AC output sockets available |
| Dimensions |
15.1" (L) × 7.2" (W) × 3.5" (H) |
Physical size of the device |
What our Experts Think
-
Compact, reliable DC-to-AC conversion
The Go Power G7579948 inverter efficiently converts 10.7V DC input into 115V AC output, making it well-suited for small mobile, RV, and auxiliary power systems where stable low-voltage DC is available.
-
Designed for light to medium loads
Experts note this model is intended for basic appliances, chargers, lighting, and low-draw electronics, not heavy-duty tools or high-wattage equipment.
-
Stable low-voltage operation window
Built to operate around typical 12V battery systems, it maintains performance close to the 10.5–16V DC input range, with protective shutdown behavior at low voltage to prevent battery damage.
-
Efficiency-focused engineering
Go Power inverters are known for efficient DC conversion and built-in safety protections (overload, over-temperature, and reverse polarity), helping extend both inverter and battery life.
-
Practical for mobile and backup setups
Ideal for RV systems, small solar setups, and emergency power kits, where dependable but simple AC output is required without complex installation needs.
Q&A
Q: What does the Go Power G7579948 inverter do?
A: It converts 10.7V DC battery power into 115V AC household power for running standard electronics and appliances.
Q: What input voltage does it require?
A: It operates on a 10.7V DC (typically 12V battery system) input range designed for RV and off-grid use.
Q: What output does it provide?
A: It delivers 115V AC output suitable for everyday appliances and mobile power needs.
Q: What type of devices can it power?
A: It can run small to medium AC loads such as lights, chargers, fans, TVs, and small appliances within its wattage rating.
Q: Is it suitable for RV or off-grid systems?
A: Yes, it is commonly used in RVs, boats, and backup/off-grid battery systems.
Q: Does it protect the battery?
A: Yes, it typically includes low-voltage shutdown around 10.7V to prevent battery over-discharge.
Q: What type of waveform does it produce?
A: Most Go Power units in this class use modified or industrial sine wave output (model-dependent), suitable for general appliances.
Q: Why is 10.7V important?
A: It is the low-voltage threshold where the inverter may warn or shut down to protect the battery from deep discharge.
Maintenance Tips
-
Maintain proper input voltage (10.7–15V range): Avoid deep battery drain below 10.7V to prevent low-voltage shutdown and stress on the inverter.
-
Use correct deep-cycle batteries only: Prefer 12V marine/RV deep-cycle batteries; avoid starter (car) batteries for long-term use.
-
Keep terminals tight & clean: Regularly check DC connections for looseness or corrosion to prevent voltage drop and overheating.
-
Ensure airflow & cooling: Install in a ventilated, dry location—do not block fan vents to avoid thermal shutdown.
-
Keep unit clean (dry only): Wipe dust with a soft dry cloth; never use water or wet cleaners.
-
Avoid overloads: Do not exceed 1000W continuous (or model rating); high surge loads can shorten lifespan.
-
Inspect wiring periodically: Use properly sized cables to reduce power loss and heating under load.
Damage 
Loss 
Theft 
