Aardwolf Slab Buggy Double Side - SBDS01
Popular in factories and on building sites. Rubber is provided on frame surfaces for maximum protection. Heavy-duty wheels allow easy maneuvering of fully loaded carts.
Features
- Bottom pads and frame face have replaceable rubber strips which protect the load from shifting and scratches
- Two swivel wheels with brakes are mounted on the front and two rigid pneumatic wheels on the back for ease of handling. All are mounted outside of the steel frame for stability
- Powder-coated finish
- Width 33"
What our Experts Think
-
Heavy-duty double-sided slab transport solution, the Aardwolf SBDS01 Slab Buggy is designed for safe and efficient movement of granite, marble, quartz, and engineered stone slabs in workshops and construction sites.
-
Dual storage design allows slabs to be carried on both sides, maximizing material handling efficiency in fabrication yards and reducing unnecessary trips.
-
High working load capacity of 750 kg (1,653 lbs total) supports professional-grade stone handling while maintaining stable, balanced transport performance.
-
Protective rubber-lined frame surfaces help prevent scratches, edge damage, and movement during transport of finished or semi-finished slabs.
-
Industrial wheel configuration (swivel front wheels with brakes + rigid rear pneumatic wheels) ensures smooth maneuverability and control, even when fully loaded.
-
Compact footprint for workshop use (approx. 1220 × 925 × 1145 mm) makes it suitable for narrow aisles and dense slab storage environments.
-
Powder-coated steel construction provides durability and corrosion resistance for long-term use in harsh fabrication and outdoor conditions.
Q&A
Q: What is the Aardwolf Slab Buggy Double Side SBDS01 used for?
A: The SBDS01 is designed for transporting and storing stone slabs such as granite, marble, quartz, and engineered stone in workshops, fabrication yards, and construction sites.
Q: What is the load capacity of the SBDS01?
A: It has a total working load limit of 750 kg (1653 lbs), with 375 kg per side for balanced loading.
Q: What materials can it safely carry?
A: It is suitable for natural and engineered stone slabs and other sheet materials commonly used in fabrication and construction environments.
Q: How is material protected during transport?
A: The frame includes replaceable rubber padding on contact surfaces to prevent scratching, shifting, and edge damage.
Q: What type of wheels does the SBDS01 use?
A: It features two front swivel wheels with brakes and two rear rigid pneumatic wheels for stability and controlled movement.
Q: What are the dimensions of the SBDS01?
A: Approximate overall size is 1220 mm (L) × 925 mm (W) × 1145 mm (H), designed for narrow workspace maneuverability.
Q: What are the key benefits of the SBDS01?
A: It improves slab handling safety, reduces manual lifting strain, and allows efficient movement of heavy stone materials in tight workshop areas.
Maintenance Tips
- Inspect frame, slab racks, and welds regularly for cracks, bending, or structural wear.
- Check rubber padding and support surfaces on both sides for wear and replace when damaged.
- Ensure wheels, axles, and bearings rotate smoothly and are free from dust, slurry, and debris.
- Lubricate wheel bearings and moving components periodically for smooth and quiet operation.
- Verify all bolts, fasteners, and wheel mounts are tight before loading slabs.
- Never exceed the rated load capacity (model-dependent, typically up to ~1500 kg) and balance slabs evenly on both sides.
- Inspect slab restraint points or safety chains (if fitted) for wear or looseness.
- Check frame alignment to ensure stable transport without tilting or shifting load.
- Store in a dry, covered area to prevent corrosion and extend service life.
- Remove from service immediately if wheel failure, frame deformation, or instability is detected.
Damage 
Loss 
Theft 
