Alpha ESC-150 Countertop Trim Kit - 5480-4250
Introducing the ESC-150 Countertop Trim Kit. It starts with the new ESC-150 Electric Stone Cutter, equipped with a powerful motor capable of cutting 1-1/4” (3cm) s"one slabs in one pass. It comes with a Carriage Assembly (ASC-6CSM), which fits on the 4’ Guide 4'il, a stable application. It also contains an Eclipse II blade (DEE006) for cutting natural and engineered stones. This system can easily cut up to 1-1/4” (3cm) m" materials and is perfect for making precise cuts for trimming countertops.
Features
- Recommended for Hard Surfaces
- Perfect for your Stone tile application
- High-End General Purpose Turbo Blade for Stone Fabricators
- Consistent Performance without Chipping
- ESC-150 Wet/Dry Stone Cutter
- 6” Carriag" Assembly (ASC-6CSM)
- 6” Eclipse" II Blade (DEE006)
- 4’ Guide R'il (ASC-GR04)
- Surface Protection Tape (BAB0650)
Specifications
| Power |
11.2 amps (1,200 W) |
| Voltage |
110V |
| No Load Speed |
10,000 RPM |
| Arbor |
7/8 in |
| Blade Capacity |
6 in |
| Max Cutting Depth |
2" (50.88m") |
| Weight |
11.30 lbs. |
What our Experts Think
-
Professional countertop trim solution: Alpha ESC-150 Countertop Trim Kit (5480-4250) is a rail-guided wet cutting system designed for precise countertop fabrication and edge trimming
-
High-accuracy cutting control: Engineered for clean, straight cuts on stone surfaces with reduced chipping and improved finish quality
-
Powerful stone-cutting performance: Built to handle dense materials like granite, quartz, porcelain, and engineered stone with consistent cutting power
-
Guide rail precision system: Includes a track-guided setup that improves stability, repeatability, and straight-line accuracy during fabrication
-
Wet cutting advantage: Integrated water feed helps control dust, cool the blade, and extend tool life while improving cut smoothness
-
Jobsite-ready design: Portable system designed for on-site countertop adjustments and professional remodeling work
-
Best for: Stone fabricators and installers needing a precise, mobile solution for countertop trimming and slab finishing
-
Key consideration: Requires proper setup and operator skill for best results—this is a professional fabrication tool, not a general-use saw
Q&A
Q: What is the Alpha ESC-150 Countertop Trim Kit (5480-4250)?
A: It is a professional stone fabrication system designed for cutting, trimming, and finishing countertop edges on granite, quartz, porcelain, and natural stone surfaces.
Q: What does the ESC-150 kit include?
A: The kit includes the ESC-150 wet/dry stone cutter, 6" carriage assembly, 4' guide rail, diamond blade, and surface protection tape for precise countertop trimming.
Q: What materials can it cut?
A: It is designed for stone, quartz, granite, porcelain, and engineered stone slabs, delivering clean, chip-free cuts.
Q: How deep can it cut?
A: The system can cut up to approximately 2 inches (50 mm) in a single pass, depending on material type.
Q: Is it suitable for professional use?
A: Yes, it is widely used by countertop fabricators and stone installers for accurate, on-site trimming and finishing work.
Q: What makes this kit useful on job sites?
A: It combines a rail-guided cutting system with a powerful motor, ensuring straight, controlled, and precise countertop cuts without chipping.
Q: Does it use wet cutting?
A: Yes, it supports wet cutting to reduce dust, improve blade life, and achieve smoother finishes.
Q: Why choose the Alpha ESC-150 trim kit?
A: It provides an all-in-one portable countertop cutting solution, reducing the need for shop fabrication and improving on-site efficiency.
Maintenance Tips
-
Clean after every use: Remove stone dust and slurry from cutter housing, blade guard, and rail system.
-
Flush wet system: Rinse water feed lines to prevent clogging and mineral buildup.
-
Inspect diamond blade: Replace if dull, chipped, or uneven to maintain chip-free trimming.
-
Keep rails clean: Dust-free rails ensure smooth, accurate straight cuts.
-
Check carriage alignment: Misalignment affects edge precision—tighten fittings regularly.
-
Dry thoroughly: Prevent rust on metal components and corrosion on guide rails.
-
Protect motor vents: Keep airflow clear to avoid overheating during long cutting sessions.
-
Store in dry case: Protect electronics and precision components from moisture and dust.
Damage 
Loss 
Theft 
