AWOCO RH-IT08-R Ceiling Mount Range Hood Mesh Filters - Split Insert - 1000 CFM & 8" Vent - RH-IT08-R30-COLD-MESH
-
RH-IT08-R30-COLD - Package includes: RH-IT08-R30 with 6000K COLD LED Lights.
-
RH-IT08-R30-WARM - Package includes: RH-IT08-R30 with 3000K WARM YELLOW LED Lights.
-
RH-IT08-R36-COLD - Package includes: RH-IT08-R36 with 6000K COLD LED Lights.
-
RH-IT08-R36-WARM - Package includes: RH-IT08-R36 with 3000K WARM YELLOW LED Lights.
Features
-
CEILING MOUNT Range Hood WITH REMOTE CONTROL: The blower unit is mounted in the attic and the hood unit is mounted in the ceiling. The ceiling mount improves ventilation and lighting over your kitchen while there is a limitation to install a range hood right above the stove. Wireless remote control to turn on and adjust the speeds. Built with high quality 1mm thick stainless steel with a brushed finish.
-
DUCTED VENT OUTSIDE, 8” ROUND TOP VENT: 8” round top exhaust vent (NO rear vent). CAUTION: Please check your existing venting duct before purchasing, there are rectangle or round ducts at different sizes. Ducts are not included.
-
4 SPEEDS POWERFUL OPERATION WITH LED LIGHTS: 4 speeds approximately (250, 500, 750, up to 1000 CFM), touch sensor panel with wireless white plastic remote control with wall mount holder. (Note: AAA batteries are NOT included) 2 3W energy saving cold bright LED lights. 1 motor in the blower unit. The blower unit needs to be installed in the attic to reduce the noise in the kitchen. Power rating: 120V/60Hz, 110W Min /160W Max. 12 ft split control cord and power cord with plug is included. Noise level at low: 40 dB, 2.5 sones. Noise level at high: 52 dB, 5.5 sones. NOT compatible with wall switch controls.
-
DISHWASHER SAFE MESH FILTERS: 4 layers dishwasher safe commercial style stainless steel/aluminum mesh filters with built-in latch. Stainless steel for the 1st layer and aluminum for the remaining 3 layers, which provide good air permeability, better suction, and less noise compared to baffle filters. The oil is contained in the mesh filters; no oil holders are needed.
- Ceiling Mount Range Hood 30" Hood unit overall dimensions: 27-5/8"W x 14-1/2"D x 4-1/8"H. Hood weight: 15 lbs.
- Ceiling Mount Range Hood 36" Hood unit overall dimensions: 35-3/8"W x 14-1/2"D x 4-1/8"H.
- Ceiling Mount Range Hood Blower unit overall dimensions: 14-5/8"W x 14-3/4"D x 14-3/4"H. Blower weight: 27.5 lbs.
What our Experts Think
Q&A
Q: What is the AWOCO RH-IT08-R30-COLD-MESH filter designed for?
A: This mesh filter is designed for the AWOCO RH-IT08-R ceiling mount range hood split insert system with 1000 CFM performance and an 8-inch vent connection.
Q: Is this range hood mesh filter washable?
A: Yes. The 4-layer aluminum/stainless mesh filter is dishwasher safe and helps capture grease for easier cleaning and maintenance.
Q: What are the benefits of the AWOCO mesh filter design?
A: The multi-layer mesh design provides good airflow, efficient grease filtration, and quieter operation compared with traditional baffle-style filters.
Q: Will this filter fit other range hood models?
A: This filter is specifically made for the AWOCO RH-IT08-R30-COLD ceiling mount range hood. Verify your model before ordering.
Q: How often should the mesh filter be cleaned?
A: Clean the filter regularly based on cooking frequency to maintain strong airflow, grease capture, and range hood performance.
Maintenance Tips
Damage 
Loss 
Theft 
