Scubapro Mens Exodry Scuba Diving Drysuit - DRYSUIT76 02-SM
Offering a unique approach to drysuit design, SCUBAPRO's EXODRY neoprene drysuit fuses 4mm high-density neoprene with latex wrist and neck seals. It's a winning combination, offering a streamlined fit, minimal inherent buoyancy, maximum range of motion and an excellent sealing system. The EXODRY's high-density neoprene is soft and pliable and it maintains its insulating properties, even on deeper dives, so it can be comfortably worn with or without an undergarment. The heavy-duty latex seals at the wrists and neck provide a comfortable, watertight seal for the upper extremities, while the firm-soled attached rubber boots seal the suit down below. This suit is hard to beat when it comes to cold-water thermal protection.
Features
- 4mm high-density neoprene resists compression so buoyancy variations are reduced at depth.
- Latex wrist and neck seals are thin yet durable and provide comfortable, watertight seals.
- Neoprene warm collar covers the latex neck seal to eliminate cold spots and increase comfort.
- Attached rubber boots provide excellent foot protection along with a non-slip sole for negotiating wet boat decks.
- Lightweight, saltwater resistant Ti-Zip dry zipper is extra-strong for years of use.
- SI-Tech valves move lots of air, enabling you to maintain excellent buoyancy control.
- I-Safe straps on both arms offer secure mounting spots for wrist instruments.
- Heavy-duty kneepads protect both suit and lower legs when working on or near the bottom.
- Convenient zippered cargo pocket lets you safely carry extra gear or accessories.
- Includes a hood, carry bag, low pressure hose, suspenders, repair kit, zipper wax and owners manual.
What our Experts Think
-
Hybrid neoprene drysuit design β 4mm high-density neoprene keeps flexibility high while still providing full dry protection and reduced buoyancy swing at depth
-
Strong cold-water insulation β Works with or without heavy undergarments depending on water temperature, making it versatile across seasons
-
Reliable waterproof sealing system β Latex wrist and neck seals plus a heavy-duty BDM dry zipper ensure consistent dryness and protection
-
Stable buoyancy control β Si-Tech inlet and exhaust valves allow precise, predictable buoyancy management during ascent, descent, and trim changes
-
Comfort-focused fit & mobility β Pre-shaped panels and neoprene construction provide better movement than most entry-level drysuits
-
Durable, mission-ready build β Reinforced knees, shoulders, and abrasion zones improve lifespan for frequent diving use
-
Practical storage & features β Thigh cargo pocket, suspenders, and integrated boots add convenience for real-world diving conditions
Q&A
Maintenance Tips
- Rinse thoroughly with fresh water after every dive, including the exterior shell, boots, valves, and zipper area to remove salt, sand, and debris.
- Flush and rinse the inflation and exhaust valves (Si-Tech system) by operating them while rinsing to prevent salt buildup and sticking.
- Clean and lightly lubricate the metal dry zipper with manufacturer-approved zipper wax after rinsing and drying to maintain smooth sealing performance.
- Hang dry completely in a shaded, ventilated area, ensuring both inside and outside are fully dry before storage to prevent odor and material degradation.
- Store in a cool, dry place with the zipper slightly closed (not fully sealed) to reduce stress on the teeth and maintain alignment.
- Inspect seals (neck/wrist), valves, zipper track, seams, and boots regularly for leaks, cracks, or wear before each dive.
- Avoid prolonged exposure to direct sunlight, heat, chlorine, solvents, and petroleum products that can damage neoprene, latex seals, and adhesives.
- Periodically check and maintain valve function and seal integrity with authorized servicing to ensure drysuit safety and performance.
Damage 
Loss 
Theft 
