DYNABRADE 5"-8" (127 mm-203 mm) Dia. Right-Angle Wet Rotary Sander, Basic - 51474

DYNABRADE 5"-8" (127 mm-203 mm) Dia. Right-Angle Wet Rotary Sander, Basic - 51474

• .7 hp, 0-2,000 RPM, Rear Exhaust, 5/8"-11 Spindle Thread.
• Basic Model runs 5" (127 mm), 6" (152 mm), or 8" (203 mm) diameter polishing pads. Pads sold separately. Without pre-assembled hook-ups for those not requiring through-the-tool water feed (for those who prefer to use a hose or spray bottle). Accepts variety of abrasive products including wet or dry discs, non-woven-nylon surface conditioning discs and filmbacked discs.
• Water is fed through the center of pad directly to the work surface, providing optimum flushing of work surface and pad. This prevents build-up of sanding residue on the disc, allowing the tool to be used efficiently in any position. Independent water rinse allows flushing of the work surface without starting the tool.
• Rear exhaust muffler reduces noise levels. Conventional rotary action with lubricated gears.
• High torque air motor has variable speed.
• Safety-lock throttle and soft-grip handle (adjusts to left or right hand).

Specifications

What our Experts Think

Q&A

Maintenance Tips

• Lubricate the air motor regularly with pneumatic tool oil unless an inline lubricator is installed.
• Use clean, dry compressed air and a clean water supply at the recommended operating pressure.
• Inspect the backing pad, sanding disc, water lines, and fittings before use; replace worn or damaged parts promptly.
• Flush the water system and clean sanding residue after each use to prevent clogging.
• Check hoses, fittings, and fasteners regularly for leaks or loose connections.
• Store the wet sander in a clean, dry location and drain any remaining water before storage to prevent corrosion.