Go Power GP-FLEX-110 Go Power Gp-Flex-110: 110 Watt Flexible Sola - G7583304
The GP-FLEX-110 is a high-efficiency, flexible solar panel designed to provide 110 watts of clean, renewable energy for various applications. With its lightweight and flexible design, it can easily conform to curved or uneven surfaces, making it perfect for RVs, boats, and other mobile installations.
Get the GP-FLEX-110 and harness the power of the sun to meet your energy needs on the go!
Features
-
High Efficiency: The 110 watt output provides ample power for charging batteries and running small appliances.
-
Flexible Design: Conforms to curved or uneven surfaces, expanding installation options.
-
Durable: Weather-resistant and durable construction ensures long-lasting performance in diverse conditions.
-
Lightweight: Easy to transport and install, ideal for mobile applications.
-
Easy Installation: Simple to install with pre-drilled mounting holes and included wiring.
What our Experts Think
-
Ultra-light flexible solar for curved surfaces
The Go Power GP-FLEX-110 is a 110W monocrystalline flexible solar panel, designed to conform to curved surfaces like RV roofs, boats, and vansāideal where rigid panels canāt be installed easily.
-
Low-profile, aerodynamic design
At under 3 mm thick and ~2.9 lbs, it minimizes wind resistance and roof weight while maintaining strong energy output for its size class.
-
Efficient real-world charging performance
Produces around 6.31A at 17.8V (110W rated output), making it best for battery maintenance and light off-grid charging, not full appliance power systems.
-
Flexible installation options
Can be bonded with adhesive or mounted via screws/grommets, allowing clean, permanent installs without heavy mounting hardware or roof drilling complexity.
-
Best paired with battery storage systems
Recommended for use with AGM or lithium battery banks (~100ā200Ah range) to maintain charge in RV, marine, or seasonal storage setups.
-
Durable but application-specific
Built with a sealed lamination layer for weather resistance, but experts note flexible panels perform best in low-shade, low-heat-deformation environments and are not meant for heavy-duty expansion systems.
Ā Ā
Q&A Ā
Q: What is the Go Power GP-FLEX-110 used for?
A: A 110W flexible monocrystalline solar kit designed to charge 12V batteries in RVs, boats, trailers, and off-grid systems.
Q: How much power does it produce?
A: It produces up to 110 watts of solar charging power under ideal sunlight conditions, typically feeding a 12V battery system.
Q: What makes this solar panel flexible?
A: It uses ultra-thin (about 3 mm) monocrystalline cells laminated in a flexible material that can bend up to ~30Ā° to fit curved surfaces like RV roofs.
Q: What comes in the kit?
A: The kit typically includes a 110W flexible panel, a 30A PWM charge controller (Bluetooth-enabled in many versions), and wiring for battery connection.
Q: Can it be mounted without drilling?
A: Yes, it can be installed using adhesive or screws, depending on the surface and setup requirements.
Q: Is it durable for outdoor use?
A: Yes, it is marine-grade and sealed with protective lamination for outdoor and mobile environments, but it must be installed properly to avoid heat buildup.
Q: What batteries is it compatible with?
A: It works with most 12V battery types including AGM, gel, flooded lead-acid, and many lithium systems
Ā
Maintenance Tips Ā
-
Clean regularly (no abrasives): Wash with fresh water and mild soap; use a soft cloth only to remove dust, salt, or bird droppings.
-
Avoid harsh tools: Do not use scouring pads, sharp objects, or abrasive cleaners that can damage the lamination.
-
Protect from over-bending: Do not exceed ~30Ā° flex; twisting or sharp bending can permanently damage cells.
-
Check mounting adhesion: Inspect adhesive or screw mounts regularly to ensure the panel stays firmly attached on curved surfaces.
-
Keep terminals & wiring secure: Ensure MC4 connections are tight, dry, and corrosion-free for stable charging.
-
Avoid heat traps: Install on ventilated surfaces where possibleāflat mounting on hot roofs can reduce efficiency over time.
-
Do not step or place objects on it: Pressure can crack internal cells even if the surface looks intact.
-
Inspect periodically: Check output performance via charge controller to catch early degradation or wiring issues.
Damage 
Loss 
Theft 
