Imer Material Hoses with Diameter Reduction Fitting - 1107074

Imer Material Hoses with Diameter Reduction Fitting - 1107074

Features

• For use with Step-Up 120 and prestige 300 pumps
• Equipped with camlock couplings for easy connection
• 1107074 = 16' x 1-3/8" (35 mm) male to 1" (25 mm) male hose w/ cam couplings
• 1107075 = 66' x 2" (50 mm) male to 1-3/8" (35 mm) female hose w/ cam couplings

What our Experts Think

• System-critical pumping accessory (not a standalone hose)
  The Imer Material Hoses with Diameter Reduction Fitting (Ref. 1107074) is a professional-grade pump hose designed for IMER continuous mixing and pumping systems, enabling controlled material transfer between different hose diameters.
• Built-in diameter transition for workflow flexibility
  Integrates a reduction fitting (e.g., 35 mm → 25 mm) to allow smooth material flow changes between pump output and spray or application lines—reducing blockages and pressure loss.
• Job-site ready coupling system
  Equipped with camlock quick couplings, making hose connections fast, secure, and leak-resistant during high-pressure pumping operations.
• Designed for IMER pump compatibility
  Commonly used with systems like Step-Up, Prestige, and other IMER mortar/grout pumps, ensuring proper integration across professional setups.
• Built for abrasive material transport
  Reinforced construction allows reliable handling of mortars, screeds, grouts, and cementitious mixes, where wear resistance is critical for daily contractor use.
• Reduces downtime on multi-material setups
  The diameter-reduction design helps crews switch between different output tools or nozzle sizes without changing full hose runs, improving job-site efficiency.
• Expert insight
  This is a workflow optimization component, not a simple hose—its value is in maintaining consistent pressure and compatibility across complex pumping systems.

Q&A

Q1: What is the Imer 1107074 material hose used for?
A: It is a professional high-pressure material hose designed for IMER pump systems, used to transport mortar, plaster, grout, and other construction materials between the pump and application point.

Q2: What is special about the diameter reduction fitting?
A: It includes a built-in reducer system that allows connection between different hose diameters (e.g., 35 mm to 25 mm) for flexible setup on job sites.

Q3: What equipment is it compatible with?
A: It is commonly used with IMER pumping systems such as Step-Up 120 and Prestige series machines, ensuring correct flow and pressure delivery.

Q4: What materials can it handle?
A: It is designed for cementitious and premixed materials, including mortar, plaster, grout, and pumpable construction compounds.

Q5: How does the hose connect to equipment?
A: It uses camlock couplings, which provide fast, secure, and leak-free connections for efficient job-site setup.

Q6: What makes this hose durable?
A: It is built with abrasion-resistant rubber and reinforced layers, designed to withstand high-pressure continuous pumping and rough construction environments.

Q7: Is it flexible for job-site use?
A: Yes, it is engineered for high flexibility and easy handling, allowing smooth routing around scaffolding and tight work areas.

Maintenance Tips

• Flush immediately after use: Run clean water through the hose until discharge is clear to prevent mortar, plaster, or grout from hardening inside.
• Use sponge cleaning kits regularly: Periodically push cleaning balls through the hose to remove internal buildup and maintain smooth flow.
• Check camlock fittings: Inspect reduction and coupling fittings for wear, dirt, or looseness to ensure a tight, leak-free connection.
• Avoid sharp bends or kinks: Keep hose alignment smooth to protect internal reinforcement and maintain consistent material pressure.
• Inspect reduction section: Pay attention to the Ø35 → Ø25 transition area where abrasion and stress are highest.
• Do not leave material inside overnight: Hardened material can permanently block or damage the hose liner.
• Rinse outer cover: Clean rubber outer layer to remove cement residue and prevent premature surface cracking.
• Store coiled and dry: Keep in a shaded, dry area to avoid UV damage, moisture buildup, and deformation.