Launch AutoHD PRO Heavy-Duty Vehicle Diagnostic Tool with Autel Laser Tread Depth and Brake Disc Examiner - LNCH-TORQUE-AUTOHD-PRO-TBE200
The X-431 Torque AUTOHD PRO is a diagnostic solution that supports Auto and commercial Heavy Duty Truck Diagnostics. The featured service and calibration functions allow for growing the HD truck segment.
Features
- Integrated with new powerful hardware X-431 Torque Auto HD Pro tablet, and Smartlink VCI,maximum the ability to faster diagnosis
- OE-level U.S. vehicle coverage as well as Asian, European coverage from 1996 and newer
- Read and erase DTCs of light, medium and heavy-duty vehicles (Class 4 through 8)
- Wireless and wired communicates via Bluetooth and USB
- Works on various systems, including Engine, Transmissions, ABS, and Auxiliary from manufacturers such as Wabco, Bendex, and Allison
- Support Cummins, Detroit, Freightliner, Fuso, Hino, International, Isuzu, KW, Peterbilt, Sterling, and Volvo
- Multilingual menu and data display: English, Spanish, French
- Optional ADAS calibration application to calibrate LOW, RCW, AVM, NV, BSD and ACC system accurately.
- Guided VW & AUDI functions/OE vehicle approved Security Gateway access by FCA ce (NEW)
- Code Assist by IDENTIFIX, access most common fixes and repair solutions with corresponding DTC's. (NEW)
- Monitor the vehicle's voltage in real lime during live dia (NEW)
- Dpf Regeneration
- Injection Quantity Adjustment
- Bleeding The Adblue Circuit
- Parked Scr Efficiency Test
- Injector Coding
- Reset Service (Mil)
- Maintenance Confirmation
- Reset Pressure Limiting Valve And Calibration
- Participate Filter Replacement Reset
- Trip Reset
- Dpf Ash Accumulator Reset
- Reset Pressure Differential Sensor
- Vgt Electronic Actuator Installation
- Parked Scr Efficiency Test
- Idle Speed Adjustment
- Speed Limit
- Cruise Control
- Idle-Stop System
- PTO
- Coolant Level Switch
- Exhaust Brake Valve
- Intake Air Preheating
- Vehicle Speed Controller
- Air Conditioner
- Oil Pressure Sensor
- Electronic Fan
- ABS
- Automatic Transmission
Specifications
- CPU 2.0GHz 4-core
- Display: 10.1 inch touch screen
- Memory: 4GB
- Storage: 128GB
- Android 10.0
- Camera: Rear 8MP, Front 5MP
- Battery: 47.88Wh (7.6V, 6300mAh)
- Dimension: 200*110*47 (mm)
- Display: 3.95", 320*480
- Wi-Fi: 2.4ghz/5ghz
- Communication: Wi-Fi & Bluetooth & Ethernet
- Ram: 256gb
- Storage: 8gb
- Working Voltage: 9v Dc-36v Dc
- Dimension: |200*110*47 (Mm)
What our Experts Think
Q&A
Maintenance Tips
-
Keep software updated: Regularly update HD truck diagnostics, vehicle database, and TBE200 module for full coverage and accuracy.
-
Protect laser sensor: Keep lens clean, dry, and free from brake dust, grease, or scratches to maintain precise readings.
-
Calibrate measurement system: Perform routine calibration for tread depth and brake disc accuracy.
-
Handle heavy-duty connectors carefully: Avoid forcing J1939/J1708 and OBD-HD adapters to prevent pin damage.
-
Clean after every use: Use a soft microfiber cloth; avoid solvents or compressed air directly on sensors.
-
Stable testing conditions: Perform measurements on stationary vehicles with proper wheel alignment on flat ground.
-
Battery care: Charge regularly, avoid deep discharge, and disconnect after full charge to extend lifespan.
-
Cable management: Prevent sharp bends or tension on HD diagnostic cables and probes.
-
Avoid harsh environments: Keep away from extreme heat, moisture, welding equipment, and high RF interference areas.
-
Safe storage: Store in a rugged, padded case to protect from vibration, dust, and workshop impacts.
Damage 
Loss 
Theft 
