PaintLine PDRKD Shelf Spikes (Set of 150)
Spikes or Felts snap on to the ) Shelf to minimize the surface area touching the stained or painted part. Use 3 or more per shelf.
Features
- Use: Minimizes contact between door and the PDRKD shelf
- Quantity: 150 pieces (enough for 3 per shelf, recommended to use one on the front and one on each side)
- Size: 1/4" centered hole
-
Material: plastic
- Color: orange
What our Experts Think
- The PaintLine PDRKD Shelf Spikes (Set of 150) are snap-on supports designed for the ProDryingRack KD (PDRKD) to reduce direct surface contact during cabinet door drying.
-
Minimizes touch points on fresh finishes
Each spike lifts and supports doors so only small contact points touch the surface, helping reduce marks, smudges, and finish damage during curing.
-
High-volume shop coverage
A single set includes 150 spikes, typically enough for multiple full rack setups (about 3 spikes per shelf recommended).
-
Snap-on, fast installation design
Tool-free clip system allows quick setup and removal, keeping workflow efficient in busy cabinet shops.
-
Durable molded construction
Made from industrial plastic designed for repeated use in high-production finishing environments.
-
Flexible use with felts option
Can be used alone for firm support or paired with felt versions for softer contact on delicate or high-gloss finishes.
-
Shop efficiency improvement
Helps reduce rework by protecting freshly sprayed surfaces while maintaining tight, organized drying layouts.
Q&A
Q: What are PaintLine PDRKD Shelf Spikes?
A: They are snap-on plastic accessories designed for the PaintLine ProDryingRack KD system to support cabinet doors while minimizing contact with the shelf surface.
Q: What is their main purpose?
A: They reduce surface contact between freshly painted or stained cabinet doors and the drying rack shelves to help prevent finish marks and sticking.
Q: How many come in a set?
A: Each pack includes 150 shelf spikes, enough for multiple full rack setups.
Q: How are they used?
A: They snap directly onto the PDRKD shelf points and are typically used in sets of three per shelf (front and sides) for balanced support.
Q: What material are they made of?
A: They are made from durable molded plastic designed for repeated shop use.
Q: Do they touch the finished surface?
A: Yes, but only at minimal contact points—this reduces surface area contact to help lower the risk of finish damage or sticking.
Q: Are they reusable?
A: Yes, they are reusable, but their lifespan depends on how often they are used and the type of finish being handled.
Q: What system are they compatible with?
A: They are designed specifically for the PaintLine ProDryingRack KD (PDRKD) system.
Q: What’s the difference between spikes and felts?
A: Spikes provide firm plastic support, while felts add a softer padded contact option for more delicate finishes.
Maintenance Tips
-
Remove paint buildup regularly: Clean dried overspray from each spike so contact points stay sharp and don’t transfer residue onto finished surfaces.
-
Inspect for broken or missing spikes: Replace any damaged pieces to maintain even support across the shelf and avoid pressure points on cabinet doors.
-
Ensure secure snap-fit: Push spikes firmly into the shelf holes—loose fittings can shift and create uneven contact during drying cycles.
-
Keep shelf surface clean underneath: Dust or debris under spikes can cause uneven seating and lead to imprint marks.
-
Avoid chemical damage: Strong solvents can weaken plastic over time, so clean with mild cleaners only.
-
Check alignment before loading: Make sure spikes are evenly distributed (typically 3+ per shelf) for balanced support and airflow.
-
Store unused spikes in dry conditions: Prevent warping or contamination for consistent performance across batches.
Damage 
Loss 
Theft 
