Quatro SPB-560-1T-K SolderPure Combo Solder/Rhodium Fume Extractor-110V - 147.630

Quatro SPB-560-1T-K SolderPure Combo Solder/Rhodium Fume Extractor-110V - 147.630

The Quatro SPB-560-1T-K SolderPure Combo is a dual-purpose fume extractor engineered for jewelers and repair technicians who perform both soldering and rhodium plating operations at the same workstation. Part of the Quatro SolderPure line, this combination SWS/RP (Solder/Waxing/Smoke – Rhodium/Plating) unit captures fumes at the source before they can circulate through your workspace. With 125 CFM airflow, a 3-stage filtration system, and quiet 52 dBA operation, it delivers professional-grade air quality without requiring external venting.

Features

• Dual-purpose combination unit for solder, waxing, smoke, and rhodium/plating fume removal
• 3-stage filtration: Dust Pre-filter → HEPA → Dual Charcoal
• No external venting required – 99.9% efficient fume and odor removal
• Quiet operation at approximately 52 dBA
• Two top inlet ports to service up to two fume extraction stations simultaneously
• Mounted on casters for easy shop mobility
• Refillable dual charcoal filters – one for rhodium/plating, one for solder/wax

Specifications

What our Experts Think

• Dual-function professional extraction: The SPB-560-1T-K SolderPure Combo is widely recognized as a premium dual-purpose unit designed to handle both solder/wax fumes and rhodium/plating vapors at a single workstation setup.
• Optimized combo filtration system: Experts highlight its 3-stage design (pre-filter + HEPA + dual activated carbon chambers) as highly effective for capturing both fine particulates and chemical odors with up to 99.9% efficiency.
• Balanced airflow for multi-media filtration: Operating at around 125–170 CFM (depending on configuration), it is engineered to maintain stable suction even with added dual charcoal resistance typical in combo systems.
• Low-noise studio performance: At approximately 52 dBA, it is consistently praised for quiet operation, making it suitable for enclosed jewelry studios and shared bench environments.
• True two-station capability: Dual inlet ports allow simultaneous connection of two extraction arms, improving workflow efficiency in small production or repair shops.
• Mobile, compact workstation design: Built on casters with a small footprint, it integrates easily into bench layouts without requiring external ducting or permanent installation.
• Specialized for mixed processes: Particularly valued in studios that alternate between soldering, waxing, and rhodium plating—eliminating the need for separate extraction systems.
• Best fit for professional jewelers: Recommended for mid-to-high level workshops that need one centralized system for both solder fumes and plating chemical control without compromising air quality.

Q&A

Maintenance Tips

• Replace filters on time: Change pre-filter, HEPA, and carbon filters regularly to maintain strong fume and odor capture.
• Monitor suction strength: Reduced airflow indicates clogged or saturated filters that need replacement.
• Keep intake area clear: Ensure soldering and rhodium fumes are unobstructed for efficient capture.
• Inspect hoses/arms: Check for cracks, loose fittings, or leaks that reduce extraction efficiency.
• Clean exterior regularly: Wipe with a dry cloth; avoid moisture near electrical components.
• Avoid heavy residue buildup: Prevent solder dust and chemical particles from overloading filters.
• Check odor control performance: Any smell leakage signals carbon filter saturation.
• Do not exceed duty capacity: Prevent continuous overload to protect motor life.
• Routine internal inspection: Periodically check fan assembly and airflow pathways for dust accumulation.