Description
The SaniServ ® model 408 soft serve freezer provides high profit, consistent quality, soft serve and yogurt products anytime anywhere!! Fewer parts to clean and sanitize means rapid disassembly and assembly. The 408’s ease of operation, production capacity and recovery combined with its common 120v make the 408 a perfect freezer for versatility and mobility. Plug it in and serve almost anywhere. Produces four – 4 oz servings per minute.
Features
- Countertop Model
- Four – 4 oz. Servings per Minute
- 20 Quart Capacity
- Air or Water Cooled
- Available in 115V electrical configuration
Product Dimensions: 33″(h) x 17″(w) x 24.8″(d)
Minimum Wall Clearance: 6
Refrigerant Type: R404A
Shipping Cubed Feet: 18.5
Warranty
Parts - 1 year
Compressor - 5 years
Evaporator - 5 Years
Subject to the terms, conditions and limitations herein, SaniServ warrants to the original purchaser that its equipment, as originally supplied, is free from defects in materials and workmanship, and will perform adequately under normal use and service.
Standard Warranty
SaniServ will replace or repair any part or parts SaniServ found to be defective in material or workmanship for
a period of one (1) year from date of installation, but no more than a maximum of (18) months from
the date of manufacture. The compressor and evaporator shall have a five (5) year warranty.
Warranty labor coverage at SaniServ SaniServ SaniServ’s standard rates during normal weekday business hours is provided
to repair or replace any component found defective under the terms of the SaniServ SaniServ SaniServ warranty for a period
of (90) days from the date of the original installation. Overtime, weekend, and holiday premiums will be
the responsibility of the buyer.
The warranty for models DF200 and 108C is limited to ninety (90) days for parts and thirty (30) days
labor with one (1) year on the compressor and evaporator assemblies.
All warranty work must be performed by a SaniServ SaniServ SaniServ Authorized Service Representative or at SaniServ SaniServ’s niServ
manufacturing facility. All warranty parts must be OEM and obtained through a SaniServ SaniServ SaniServ authorized parts
distributor.
This warranty applies only to the original purchaser at the original installation location, and is only good if customer: (i) purchases and completes Check, Test and Start (CTS) service ($375 for single-barrel machines and $475 for double-barrel machines); (ii) returns the fully completed CTS warranty registration form to SaniServ within thirty (30) days of the date of purchase by the original purchaser-user but not to
exceed eighteen (18) months from date of shipment from factory.
Any use of SaniServ equipment prior CTS completion will void all warranties. If, upon inspection by SaniServ or its Authorized Service Representative, SaniServ it is determined that this equipment has not been properly installed, the warranty will be void.
If the nameplate or other identifying marks have been removed, defaced or changed or the unit has been repaired or altered by persons other than expressly approved by SaniServ, the warranty will be void.
This Limited Warranty does NOT cover; (i) rubber and non-metallic synthetic parts including, but not limited to, gaskets, o-rings, scraper blades, faceplates, rear seals, electrical cords, belts, drip trays, machine legs, or hoses; (ii) calibrations, product consistency adjustments, end-user training, or belt realignments once the CTS has been completed; (iii) repairs required because of failure to regularly clean
and maintain the equipment in accordance with instructions in the Operator’s Manual; (iv) repairs required because the equipment has been; (a) altered or repaired other than by a SaniServ SaniServ SaniServ Authorized Representative, (b) damaged due to misuse or misapplication, neglect, abuse, accident, fire, flood, riot or
acts of God, (c) used other than in accordance with the procedures and instructions contained in the Operator’s Manual, or (d) damaged during transit or delivery; (v) equipment failure caused by inadequate water quality, improper cleaning, harsh chemicals or acids.
When any situation occurs which voids the warranty, the manufacturer shall not be liable for any damage to any person or any property which may result from the use of the equipment thereafter. Warranty is limited to SaniServ manufactured products only and does not apply to other equipment which may be connected to or installed within.
Shipping
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options.
You can view our shipping policy here.
Returns/Refunds/Damages
Customers have 48 hours to inspect and report damages & no item may be returned after 30 days of the original ship date from our facilities.
Items that are returned damaged or without proper packaging materials are subject up to a 25% restock fee.
You can view our shipping policy here.
Product Specifications
| Brand |
SaniServ |
| Model Number |
408 |
| Weight |
285 lbs |
| Width |
17" |
| Depth |
28.6" |
| Height |
32.5" |
| Installation Type |
countertop |
| Operation Type |
Air Pump |
| Cooling |
air or water cooled |
| Hopper Quantity |
1 |
| Hopper Capacity Each (Qt) |
20 |
| Cylinder Quantity |
1 |
| Cylinder Capacity Each (Qt) |
6.4 |
| Exterior Finish |
stainless steel |
| Refrigeration |
self-contained refrigeration |
| Valves |
1 |
| Flavors |
1 |
| Voltage |
115 |
| Phase |
1 |
| Production Per Hour |
240 cones |
Documents
Spec Sheet
Damage 
Loss 
Theft 
