Stanley Underwater Hydraulic Trash Pump - TP0300301

Q: What is the Stanley TP0300301 Underwater Hydraulic Trash Pump used for?
A: It is a compact submersible hydraulic trash pump designed for dewatering, sediment removal, and pumping water containing sand, silt, sludge, and debris in underwater and construction applications.

Q: What is the maximum pumping capacity?
A: The TP0300301 delivers up to 300 GPM (1,136 LPM), making it suitable for fast dewatering and general pumping tasks.

Q: What hydraulic flow and pressure does it require?
A: It operates with 5–8 GPM (19–30 LPM) hydraulic flow at 1,500–2,000 PSI (105–140 bar) for reliable performance.

Q: Does the pump require priming?
A: No. It is self-priming, fully submersible, and can safely run dry without damaging the hydraulic motor.

Q: What materials can it pump?
A: It is designed to handle water, mud, sand, sludge, and small solids, making it ideal for commercial diving, utility, and construction work.

Q: Are hose whips and hydraulic couplers included?
A: The pump typically includes hose whips, while quick-disconnect hydraulic couplers are sold separately.

• Rinse the pump thoroughly with fresh water after every use.
• Remove sand, silt, and debris from the pump and intake screen.
• Inspect hydraulic hoses, fittings, seals, and couplers before operation.
• Verify hydraulic flow and pressure meet manufacturer specifications.
• Check the impeller and intake for wear or blockages.
• Tighten loose fasteners and replace worn components promptly.
• Keep hydraulic ports clean and capped when not in use.
• Store the pump clean, dry, and protected from impact and corrosion.